PercoTop 611 2K DTM Topcoat

PercoTop® 611 effectively answer all industrial finishing needs for single layer interior and exterior applications. PercoTop® 611 is two-component, polyurethane-based solvent-borne topcoat for direct-to-metal application on an enormous variety of industrial and architectural uses. It's ideally suited for machines, advertising boards, switchboards and road signs. PercoTop® 611 boast excellent adhesion and corrosion protection for every type of metal substrate, from steel to aluminium and galvanised steel. The extreme resistance to mechanical stresses strengthens the robust nature of this topcoat even further.

See more details

Technical Data Sheet

Download MSDS (Safety Data Sheet)

Send an inquiry Where to buy?
Product description

COLOURS

Colour:
  • Industrial and standard colour registers.
   

 

SUBSTRATES

Substrates:
  • Steel and aluminium.
  • Galvanic, sendzimir and hot dip galvanised steel.
   
Surface preparation:
  • Substrates must be free from all contaminants.
  • Because of the variety of metal alloys and manufacturing processes, it is recommended to carry out a preliminary adhesion test.
   

PRODUCT PREPARATION

 

Activator:

CS710 PercoTop® Activator VHS Fast
CS711 PercoTop® Activator VHS Standard
CS712 PercoTop® Activator VHS Slow
CS704 PercoTop® Activator 3840
CS706 PercoTop® Activator 4060
   
Thinner: CS610 PercoTop® Thinner Fast
CS620 PercoTop® Thinner Standard
CS630 PercoTop® Thinner Slow
CS600 PercoTop® Thinner Standard
   
Mixing Ratio:

9:1 By Volume

10:1 By Weight 
   
Pot life at 20°C

8 hours with CS710-CS712 activators.
   

Recommended dry film thickness:

60 - 100 µm.
   

 

 

 APPLICATION

Method of application Application viscosity
DIN 4 mm, +20°C,		 Thinner Nozzle Pressure
bar		 Number of coats
Gravity / Suction feed 20-22 s 15-30% 1.4-1.8 mm 2.5-3 2-3
HVLP 20-22 s 15-30% 1.4-1.8 mm 2-2.5  2-3
Airless / Airmix 30-35 s 10-15% 0,23-0.28 mm 2-3.5 Air
ca.80-120
Material		 2
 Pressure pot / Membrane pump 20-22 s 15-30% 1.1 mm 2.5-3.5 Air
1-1.5
Material		 2
Electrostatic According to the advice of the technical representative
Recomended film thickness /dry/ 60-100 μm

 

 

DRYING

Air drying at 20°C:

60 μm dry film thickness 

  • Dust dry : 20min With CS710;30 min With CS706
  • Dry to handle  : 1 hours with CS710; 3 hours with CS706
  • Dry to assemble : 24 hours with both Activators
   
Forced drying:

Flash time: 10 minutes.

Drying time : 30 minutes.

Drying temperature : 60°C object temperature